Zemismart
Zemismart AM24-WF WiFi Venetian Blind Motor
- Wi-Fi
Verified September 2026
The simple-setup sibling to our Zigbee AM24-ZB listing — same aluminium venetian blind motor, but talks straight to WiFi and the Tuya/Smart Life app instead of needing a Zigbee gateway. Easier to get going, but cloud-only through HA's Tuya integration: expect a cloud round-trip and occasional lag rather than instant local response. It's battery-powered rather than mains-wired, so no trailing cable to hide — but Zemismart doesn't publish torque, maximum slat-width, or noise figures for this SKU, so confirm load capacity with support before fitting to wider bay-window blinds. Pick this only if you don't already run Zigbee and just want voice control working quickly on a standard single window.
In Home Assistant
| Control | Type | What it does |
|---|---|---|
| Lift position | Cover (0-100%) | Primary cover entity exposing open/close/stop plus set-position for the raise/lower axis. |
| Tilt position | Cover (0-100%) | Second, separate cover entity that carries the slat-angle axis as its own position — automations set position on this entity to angle the slats. |
| Stop | Service | Per-entity stop action on both the lift and tilt covers, useful given the reported cloud-lag/state-stuck issues on Tuya cover devices. |
Because Tuya's cover platform maps lift and tilt to two independent cover entities rather than one entity's position plus a tilt attribute, HA sees this device as two separate cover entities each with their own 0-100% position — there's no native cover-tilt attribute or single-entity tilt slider, so tilt-aware automations must target the second entity explicitly. Open reports against the Tuya cover platform describe position drifting after inactivity and covers sticking in an opening state, consistent with the polling-based cloud round-trip this listing already flags. The community localtuya HACS project can front-run the cloud lag with local push-based state updates instead of polling, but it needs a local key pulled from the Tuya IoT Cloud project per device and offers no extra tilt-specific handling beyond what the stock integration already exposes as two entities.
Specs
- control
- Tuya Smart Life app + RF remote
- noise level
- Not published by Zemismart for this SKU
- hub required
- None (direct WiFi)
- power source
- Built-in rechargeable battery (not mains-wired) — Zemismart does not publish capacity or recharge interval for this SKU
- torque load capacity
- Not published by Zemismart for this SKU — confirm with support before fitting to wide or heavy venetian blinds
- compatible blind types
- Aluminium venetian blinds (tilt + lift)