Zemismart
Zemismart AM24-ZB Zigbee Venetian Blind Motor
- Zigbee
Verified September 2026
The category is short on genuine venetian-slat-tilt motors, and this is the most credible one we could verify: a Tuya Zigbee motor built for aluminium venetian blinds rather than a repackaged roller motor. Be aware it's Zigbee to a Tuya gateway, not a device we could confirm on the Zigbee2MQTT or ZHA supported-device lists — in practice that means routing it through the Tuya cloud integration rather than fully local control, so don't buy it expecting the same local behaviour as our Aqara or Zemismart roller motors.
In Home Assistant
| Control | Type | What it does |
|---|---|---|
| Lift position | Cover (0-100%) | Primary cover entity controlling raise/lower, reported via the Tuya cloud integration. |
| Tilt position | Cover (0-100%) | Secondary cover entity for slat tilt angle only, exposed as a separate entity rather than a tilt attribute on the lift cover. |
| Motor direction | Select | Reverses lift/tilt motor direction to correct for installation orientation; set once during setup. |
| Gateway dependency | Infrastructure | Not directly exposed by the integration, but the Tuya Zigbee gateway hub being online effectively gates whether the cover entities update at all. |
This shares the AM24 line's firmware with the WiFi AM24-WF, so once it lands in Tuya's cloud the Home Assistant side behaves the same way: two separate cover entities per blind, one for lift and one for tilt-only slat angle, with tilt position that can drift from what the physical slats are actually doing after cloud round-trips. The difference here is upstream of HA — the motor talks Zigbee only to its Tuya gateway hub, not to a generic coordinator, so if that gateway drops offline or loses its own cloud connection, both entities go stale even though your Zigbee network and HA are otherwise healthy. The community localtuya integration can pull it off the cloud polling path the same way it does for the WF model, but you're still going through the gateway's Tuya credentials, not a native Zigbee cluster.
Specs
- battery
- Rechargeable, RF remote included
- hub required
- Tuya Zigbee gateway
- compatible blind types
- Aluminium venetian blinds (tilt + lift)