IKEA
IKEA MYGGSPRAY Wireless Motion Sensor
- Native integration
- Local control
- Thread
- Matter
Prices verified September 2026
See more sensors picks on our Amazon storefront →Our verdict
IKEA's 2026 Matter-over-Thread replacement for the Vallhorn, and at £7 it's still the cheapest way to scatter motion sensing around a UK home — you'll need a Thread border router (ZBT-1, Apollo, or an Apple/Google hub) since it won't talk to HA on its own. Two AAA batteries (IKEA recommends its own LADDA rechargeables) last around 15 months, and the IP67 rating means it's happy on a covered porch as well as indoors, not just a hallway ceiling. It's only rated for mounting up to 2m high, so skip it for anything above a standard doorway or stairwell.
What can Home Assistant control on the IKEA MYGGSPRAY Wireless Motion Sensor?
| Control | Type | What it does |
|---|---|---|
| Occupancy | Binary sensor | PIR motion state exposed via the Matter occupancy cluster. |
| Illuminance | Sensor | Built-in ambient light reading from the same endpoint, usable to gate lighting automations on darkness without a separate light sensor — readings run low versus other brands. |
| Battery | Sensor (%) | Battery percentage reported over Matter. |
| Battery voltage | Sensor | Raw voltage, more granular than the percentage estimate for tracking discharge curves. |
| Identify | Button | Triggers the device's identify behaviour for locating a specific sensor during setup or troubleshooting. |
Unlike a plain PIR, this sensor's Matter occupancy cluster carries a paired illuminance measurement, so a motion-AND-dark lighting automation works without adding a separate lux sensor — but its lux readings run noticeably lower than dedicated sensors from other brands, so don't port a threshold tuned elsewhere, and some units have hit a stuck-low-reading bug that needs a re-pair to clear. The dropout issue mentioned in our own editor note is tracked as a documented core regression: sensors disconnect a few hours after pairing on certain HA releases even though the same devices stay stable in the IKEA and Google apps, and the only known workaround is pulling and reinserting the battery. Because it self-supplies ambient light data, it suits a hallway or porch fixture that scales brightness with dusk/dawn rather than flipping a flat on/off, freeing up the endpoint a separate light sensor would otherwise need.
Specs
| Weight | 90g (0.09kg) |
|---|---|
| Material | ABS plastic |
| IP rating | IP67 — rated for indoor and outdoor use |
| Dimensions | Approx. 70mm diameter x 40mm deep; boxed 7 x 8 x 5cm |
| Battery life | Approx. 15 months on 2 fresh LADDA AAA rechargeables, per IKEA's technical data |
| Battery type | 2x AAA (HR03); IKEA recommends its own LADDA HR03 1.2V rechargeables (batteries not included) |
| Wireless range | 10m in open air (IKEA's published Matter-over-Thread radio range at 2402-2480MHz, 5dBm EIRP) — IKEA does not publish a separate PIR detection range or angle figure for this sensor |
| Mounting height | Rated for mounting up to 2m high only; no bracket or adhesive included in the box |
| Max connected lights | Up to 10 light sources paired to one sensor |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
How does the IKEA MYGGSPRAY Wireless Motion Sensor compare?
| Product | From | Protocol | Local control | Integration |
|---|---|---|---|---|
| IKEA MYGGSPRAY Wireless Motion Sensor (this product) | £7 | Matter, Thread | Yes | Native |
| Aqara Door and Window Sensor P2 | £23.99 | Matter, Thread | Yes | Works with HA |
| Aqara Motion Sensor P1 | £18.99 | Zigbee | Yes | Zigbee2MQTT / ZHA |
| Aqara Multi-State Sensor P100 | £25.49 | Zigbee, Thread, Matter | Yes | Zigbee2MQTT / ZHA |
Frequently asked questions
- Does the IKEA MYGGSPRAY Wireless Motion Sensor work with Home Assistant locally?
- Yes. The IKEA MYGGSPRAY Wireless Motion Sensor is controlled locally in Home Assistant through a built-in Home Assistant core integration (matter), so it keeps working if your internet connection or the IKEA cloud goes down. Control and state updates stay on your own network.
- Which protocol does the IKEA MYGGSPRAY Wireless Motion Sensor use, and do I need a hub?
- The IKEA MYGGSPRAY Wireless Motion Sensor uses Matter and Thread. To pair it with Home Assistant you need a Thread border router if it is Matter-over-Thread, or just your Wi-Fi network if it is Matter-over-Wi-Fi; or a Thread border router (Home Assistant Connect ZBT-1, Apple TV 4K or a HomePod mini all work). IKEA's own hub is not required when you integrate through a built-in Home Assistant core integration (matter).
- How much does the IKEA MYGGSPRAY Wireless Motion Sensor cost in the UK?
- The lowest price we have listed for the IKEA MYGGSPRAY Wireless Motion Sensor is £7 at IKEA UK. Prices were last checked in September 2026 and change often, so confirm on the retailer's page before buying.