Innr
Innr Smart Spot Colour GU10 (RS 242 C, 2-pack)
- Zigbee
Verified September 2026
This 2-pack's Amazon UK listing is currently out of stock (as of August 2026) — the ASIN was merged into a 4-pack listing priced at £33.99, roughly £8.50 a bulb, still comfortably under both Philips Hue's colour spotlight and Hue's white-only White Ambiance GU10 at £29.99 a bulb; check current pricing before buying. The 50° beam is a tight, directional throw rather than broad ambient light, built for task lighting over a hob or worktop, not filling a room. CRI is a claimed >84, a shade behind Hue but fine for everyday use. Zigbee 3.0 with genuine local control means no bridge tax. For a bank of four-to-six kitchen downlights where you want colour scenes on a budget, this is the sensible buy once back in stock; chase Hue if colour-accurate accent lighting matters more than price.
In Home Assistant
| Control | Type | What it does |
|---|---|---|
| Light | Switch | On/off/toggle via the standard Zigbee2MQTT light entity. |
| Brightness | Number (0-254) | Dimming level exposed as the light entity's brightness attribute. |
| Colour temperature | Number (153-556 mired) | ~1800K-6500K, with named presets coolest/cool/neutral/warm/warmest. |
| Colour | Colour (xy/hs) | Full colour control via CIE xy or hue/saturation, with RGB/hex/HSB input support in HA's light service. |
| Effect | Select | Zigbee alert effects: blink, breathe, okay, channel_change, colorloop. |
Zigbee2MQTT exposes the full colour_temp range (153-556 mireds, roughly 1800K-6500K) alongside colour_xy and colour_hs, plus the standard Zigbee alert/effect set (blink, breathe, okay, colorloop) — Innr honours all of these reliably, unlike many budget Tuya GU10s that silently ignore effect commands. Because it's mains-powered, each spot also acts as a Zigbee router, so a run of six kitchen downlights forms a strong local mesh backbone rather than depending on the coordinator's direct range. One caveat: alert/effect commands sent to a group of these bulbs, rather than addressed individually, have been reported to trigger unwanted brightness flashing — worth testing group-based automations before relying on them for effects.
Specs
- cri
- >84
- fitting
- GU10
- wattage
- 4.9 W
- lifespan
- 50,000 hours
- pack size
- 2
- beam angle
- 50°
- brightness
- 410 lm
- dimmable range
- 1-100%
- colour temperature
- 1800-6500 K (plus full RGB colour)