Smart Home Assistant
Robot vacuums
Roborock Qrevo Series (QV 35S)

Roborock

Roborock Qrevo Series (QV 35S)

Cloud integrationCloud required
  • Wi-Fi
See more robot vacuums picks on our Amazon storefront →

Verified September 2026

The mid-range sweet spot, sitting between the Q5 Pro and the MaxV Ultra: 10000Pa suction, dual anti-tangle brushes and an auto-wash/dry dock, without the flagship price. At 35 x 35 x 10cm it clears most UK sofa and kickboard gaps, and obstacle avoidance uses Roborock's structured-light Reactive Tech rather than a camera, so it keeps working with the lights off. The 5200mAh battery covers a typical UK flat or small terrace on one charge. UK naming is a maze — this succeeds the Q Revo S — check the model code (QV 35S) matches what you're buying. Same cloud-polling roborock integration, no local Matter fallback on this tier.

In Home Assistant

ControlTypeWhat it does
Mop dryingBinary sensorOn while the dock's warm-air dry cycle is actively running on the mop pads.
Mop drying remainingSensorMinutes left until the current dry cycle finishes and the mop is ready for the next clean — useful for gating a scheduled-clean-delay automation.
Clean water tankBinary sensorFlags when the dock's clean water tank is empty or not seated, which silently blocks the auto-wash portion of the cycle.
Dirty water tankBinary sensorFlags when the dirty water tank is full or missing, which stops mop washing until emptied.
Dock errorSensorText status covering wash/dry-specific faults in addition to generic dock errors.

The auto-wash/dry dock adds entities a plain auto-empty dock doesn't have: binary sensors for mop-drying-in-progress and clean-water/dirty-water tank state, plus a mop-drying-remaining-time sensor and a dock-error sensor covering wash/dry faults specifically. These are cloud-polled on the same interval as the rest of the roborock integration, so mop-drying status can lag the physical dock by a minute or two. A real quirk: if a scheduled clean is due while the dock is still mid dry-cycle from the prior run, Roborock's own dock logic — not Home Assistant — pushes the job start back until drying finishes, and none of the exposed entities flag this as an error, so a schedule-only automation can appear to silently skip a run.

Specs

dock
all-in-one auto-empty, auto-wash and dry
battery
5200mAh Li-ion; Roborock does not publish a runtime figure in minutes for this model
mopping
dual spinning mop pads up to 200rpm with auto carpet lift-up; auto mop washing & warm-air drying at the dock
suction
10000Pa HyperForce
dimensions
Robot: 35 x 35.3 x 9.7cm; Dock: 34 x 48.7 x 52.1cm
navigation
PreciSense LiDAR (360° scan/map), dual anti-tangle brushes, multi-floor mapping up to 4 floors
obstacle avoidance
Reactive Tech — structured-light based (non-camera), works in low light/dark
Affiliate disclosure: Some links in this article are affiliate links. If you buy via one of these links, we may earn a small commission at no extra cost to you. This never affects our editorial decisions — see our affiliate policy.