Roborock
Roborock Saros 10R
- Wi-Fi
- Matter
Verified August 2026
Not the Saros 20 already on this site — the 10R is the earlier (early-2025) ultra-slim flagship that pioneered the same 79.8mm AdaptiLift chassis trick, just with noticeably less muscle: 22,000Pa suction versus the 20's 36,000Pa, and a shallower 4cm threshold climb against the 20's 3.46in lift. Its HA support is the more settled of the two — the local-connection crash that briefly made new units go 'unavailable' (home-assistant/core#148815) was patched in a python-roborock library bump back in September 2025, so you're not chasing an open bug like current Saros 20 buyers are. The real catch is UK retail: Roborock's own UK store has dropped the 10R from its lineup entirely (only Saros 10 and Saros 20 remain), leaving Amazon UK third-party sellers as the only route in at a noticeable premium over US pricing. Worth it for the slim-body design at a lower outlay than the 20 if 22,000Pa is enough suction for your floors — otherwise the Saros 20 or S8 MaxV Ultra are the better UK-backed buys.
In Home Assistant
| Control | Type | What it does |
|---|---|---|
| Vacuum | Vacuum | Start/pause/stop/dock, fan speed and mop intensity selects |
| Battery Level | Sensor (%) | Current battery percentage |
| Cleaning Area / Time | Sensor | Area cleaned and duration for the current or last run |
| Mop Attached | Binary sensor | Whether the mop module is currently docked to the robot |
| Water Shortage | Binary sensor | Alerts when the mop water tank needs refilling |
| Live Map | Image | Rendered floor map with room boundaries (cloud-dependent) |
The core roborock integration (home-assistant.io/integrations/roborock) lists the Saros series as fully supported and exposes a vacuum entity (start/pause/stop/dock plus fan-speed and mop-intensity selects), sensors for battery, cleaning area/time and consumable life, binary sensors for mop-attached and water-shortage, and a live map image entity — polled locally roughly every 30 seconds with cloud fallback used for setup, routines and map rendering. Early Saros 10R units hit a device-specific bug (home-assistant/core#148815): local commands failed to decrypt ('Failed to decode...Padding is incorrect'), forcing the integration onto the rate-limited cloud API and eventually marking the device unavailable — fixed by bumping the python-roborock dependency to 2.47.1 (PR #152844, merged September 2025), so units set up on a current HA release shouldn't hit it. There's no dedicated vacuum-only/mop-only select exposed in the entity list; the documented workaround on community.home-assistant.io is to call vacuum.send_command with mop_power/water_box parameters first, then a separate vacuum.start action, since the app's combined 'cleaning mode' picker doesn't map to one HA control.
Specs
- dock
- 10-in-1 Multifunctional Dock 4.0 — auto-empty, 80°C hot-water mop wash, warm-air dry, auto-detergent dispense, 2.5hr fast charge
- height
- 79.8mm (3.14in)
- battery
- 6400mAh, approx. 180min runtime
- wifi band
- 2.4GHz only — no 5GHz support
- mop system
- Dual spinning mops, FlexiArm Riser side brush, auto-detach before vacuuming carpet, 22mm max mop lift
- navigation
- StarSight Autonomous System 2.0 — dual solid-state LiDAR + 3D ToF + RGB camera, 108 recognised object types — plus VertiBeam lateral obstacle avoidance
- suction power
- 22,000 Pa (HyperForce)
- dock dimensions mm
- 381 x 475 x 488
- threshold crossing
- 40mm (AdaptiLift chassis)
- robot dimensions mm
- 350 x 353 x 79.8