How did we choose these wired camera systems?
We compared complete PoE NVR kits sold in the UK on image resolution, whether the NVR ships with enough built-in PoE ports for its bundled cameras, local storage capacity, and — the deciding factor for most readers of this site — whether Home Assistant has an official core integration, an unofficial but workable path via ONVIF/Hikvision protocols, or no documented integration at all. We excluded single standalone wireless cameras, which are covered in our outdoor security camera guide linked above.
What are the best wired security camera systems in the UK for 2026?
1. Reolink RLK8/RLK16 PoE NVR kits — best all-round wired system
Price: From around £600 for a 4-camera 4K kit (RLK8-811B4) up to around £1,250 for an 8-camera 4K kit with 4TB storage (RLK16-811B8-A), per Reolink's official UK store.
Pros: Genuine 4K (8MP) sensors; NVR ships with built-in PoE ports so no separate switch is needed for kit-sized deployments; continuous 24/7 local recording with no subscription; AI person/vehicle detection runs on the NVR; the single strongest Home Assistant support of any wired system in this list.
Cons: Requires running Ethernet cable to every camera; higher-channel kits are a serious outlay; the mobile app is functional rather than polished.
Reolink's PoE NVR kits are the most-recommended wired system among UK Home Assistant users, and for good reason. Home Assistant's official, core Reolink integration discovers a Reolink NVR on your network and automatically adds every connected camera as a separate device, exposing camera streams, person/vehicle/pet detection as binary sensors, PTZ controls where relevant, and a Record/Push switch per channel and for the NVR as a whole. It is fully local once RTSP is enabled — no cloud round-trip required for the HA side. For a closer look at Reolink's single-camera range, see our Reolink camera UK review.
2. Ubiquiti UniFi Protect (UNVR-Instant Kit) — best for existing UniFi networks
Price: £555 for the UNVR-Instant Kit (NVR with a built-in 6-port PoE switch, four G5 Turret Ultra cameras and a 1TB drive included), per Ubiquiti's official UK store. Standalone UNVR units start at £171.
Pros: Best-in-class local web/app UI; official, actively maintained Home Assistant integration (unifiprotect) that ships in HA core; built-in PoE switch means the kit is genuinely self-contained; strong AI smart-detection zones.
Cons: Only sensible if you are already running (or willing to run) UniFi networking gear, since Protect needs a UniFi OS console; not a system to buy in isolation.
UniFi Protect is the system to pick if you already run a UniFi router or access points, or are happy to standardise your whole network on Ubiquiti. Home Assistant's unifiprotect integration is officially documented, creates camera, motion, and doorbell entities automatically, and uses the local RTSP stream rather than the cloud — but it does require a local UniFi OS user account (cloud SSO accounts will not work for the integration). It is the most ‘it just works’ wired option for anyone deep in the HA/homelab ecosystem, at a real price premium over Reolink or Annke.
3. Annke H800 PoE kit — best budget wired system
Price: Around £296–£474 for the H800 4-camera 8MP kit (NVR plus 4 cameras, HDD sold separately), per Annke's official UK store.
Pros: Genuinely low cost per camera for 4K-capable hardware; 8-port PoE NVR; works with Alexa for viewing; ONVIF and Hikvision-protocol compatible, so it can be added to Home Assistant via the generic Hikvision or ONVIF integrations.
Cons: No official Home Assistant integration — you are relying on the generic ONVIF camera platform or the community Hikvision integration, which gives you a live stream and basic motion state rather than the rich entity set Reolink or UniFi Protect provide; HDD is an extra cost; app and firmware update cadence are less polished than the bigger brands.
Annke's NVRs are built on Hikvision's underlying platform, so — like other Hikvision-derived kits — Home Assistant's Hikvision integration or the built-in generic ONVIF/RTSP camera platform can usually pull a live feed and basic event sensors. It is not a native, purpose-built integration, so treat it as ‘will work, with more manual setup’ rather than plug-and-play. For the price, though, an 8MP 4-camera wired kit for under £300 is hard to beat if HA integration is a nice-to-have rather than a requirement.
4. Hikvision consumer NVR kit — best image quality for demanding installs
Price: Complete 4-channel 8MP PoE kits typically run from around £600 up to £890+ before storage through UK trade/CCTV suppliers, plus roughly £65–£275 depending on drive size.
Pros: Industry-reference image quality and low-light performance; deep motion analytics on the NVR; extremely wide range of camera types (turret, bullet, PTZ) that all work on the same recorder; Home Assistant has an official Hikvision integration supporting camera entities and 20+ event-based binary sensors.
Cons: Consumer app (Hik-Connect) is clunky next to Ring or Eufy; setup and port-forwarding for remote access is fiddlier than consumer brands; in November 2022 the UK government issued guidance (Cabinet Office Written Ministerial Statement HCWS374) restricting Hikvision and Dahua equipment on government ‘sensitive sites’ over supply-chain security concerns — this does not apply to private residential use, but some households prefer to avoid the brand on principle.
Hikvision's kits sit at the professional end of the consumer market, and it shows in image quality and NVR feature depth. The HA integration is genuinely solid — camera streams plus a long list of event sensors (motion, line crossing, tamper, disk error, and more) via the NVR's own event notifications. It is the strongest choice if image quality and low-light detail are the priority and you are comfortable with a more technical setup. For more detail on the brand and the government guidance context, read our Hikvision security camera UK review.
5. Swann AdvancedX PoE kit — best plug-and-play, no HA needed
Price: From around £350 for a 4-camera 3K kit up to around £800 for an 8-camera 4K kit, per Swann's official UK store.
Pros: Genuinely easy to self-install; Swann's own app and desktop software are straightforward for non-technical users; good range of channel counts (4, 6, 8, 16) and resolutions (3K up to 6K); competitive pricing at the 8-camera 4K tier.
Cons: No official Home Assistant integration, and Swann does not document ONVIF or open RTSP access for third-party use in the way Reolink, Hikvision, or Annke do — so treat this system as a closed, standalone kit rather than a smart-home component. If HA integration matters to you, this is not the system to buy.
Swann is a reasonable choice if you want a wired system purely as a standalone CCTV setup and have no interest in Home Assistant — the hardware and app experience are genuinely good for the price. But it is the one system in this list we cannot recommend for an HA-integrated home: unlike Reolink, Hikvision, or Annke, there is no documented, reliable way to pull a local stream or event data into Home Assistant. Buy it for CCTV; buy something else if you want it in your smart home.
Which wired camera systems actually integrate with Home Assistant?
| System | HA integration | How it connects |
|---|---|---|
| Reolink | Official core integration | Native NVR discovery, full entity set, local RTSP |
| UniFi Protect | Official core integration (unifiprotect) | Native, local RTSP, requires local UniFi OS account |
| Hikvision | Official core integration | Native NVR event stream + RTSP camera entities |
| Annke | Unofficial — via Hikvision or generic ONVIF platform | Local RTSP stream; basic motion state only |
| Swann | None documented | Closed ecosystem — not recommended for HA |
If a smooth Home Assistant setup matters to you, that table is the whole decision in one place: Reolink, UniFi Protect, and Hikvision all have official, actively maintained core integrations. Annke will usually work through generic ONVIF or the Hikvision integration since its NVRs share Hikvision's underlying protocol, but expect more manual configuration and a thinner entity set. Swann should be treated as a standalone CCTV system, not a smart-home component. For a fully local, open-source alternative that works with almost any RTSP camera regardless of brand, see our Frigate NVR with Home Assistant setup guide — it can sit in front of any of these systems' camera streams and add its own AI detection layer.
What do you need to plan for with PoE cabling and installation?
Cabling: every camera needs a Cat5e/Cat6 Ethernet run back to the NVR (max 100m per run for standard PoE). For a typical semi-detached or terraced UK home, that usually means running cable through the loft and down external walls, or along skirting internally — budget a weekend for a 4-camera install if you are doing it yourself, more if walls need drilling for outdoor runs.
Power budget: most 4–8 channel NVR kits include enough built-in PoE ports and power budget for the bundled cameras; if you add extra cameras beyond the kit, check the NVR's total PoE wattage budget (typically 802.3af/at, up to 25.5W per port) before assuming you can simply plug more in.
Storage: a single 4K camera recording continuously typically uses roughly 40–60GB per day depending on scene complexity and bitrate settings; a 2TB drive gives around 10–14 days of continuous 4-camera 4K footage, or considerably longer with motion-triggered recording only. Surveillance-rated drives (WD Purple, Seagate SkyHawk) are designed for 24/7 write cycles and are the sensible choice over a standard desktop HDD.
What are the UK legal requirements for wired security cameras?
Residential CCTV is legal in the UK, but cameras that capture images of public pavements, roads, or a neighbour's property fall under UK GDPR. The Information Commissioner's Office (ICO) recommends angling cameras to cover only your own property, displaying a notice where cameras are visible, and not retaining footage longer than necessary. For placement guidance specific to wired camera systems, see our security camera placement guide.
Our verdict
For most UK households wanting a genuinely wired, subscription-free multi-camera system with solid Home Assistant support, the Reolink RLK8/RLK16 PoE NVR kit is the strongest all-round pick — good image quality, a real HA integration, and no ongoing cost. If you already run UniFi networking gear, the UniFi Protect UNVR-Instant Kit is worth the premium for the best software experience. Budget buyers who don't mind a bit more manual HA configuration should look at the Annke H800, and anyone prioritising raw image quality above all else should consider a Hikvision kit. Only the Swann AdvancedX range is a genuine step outside the smart-home ecosystem — buy it if you want standalone CCTV and nothing more.
